Wave Meter Class C No 1
Crystal Unit and Vibrator Power Supply

Circuit Diagram, Service Manual, Service Information,  Schematic Diagrams and Manuals

For Repairing, Restoration and Servicing of Vintage and Modern Electronic Equipment

Manual Circuit and
Operation Instructions
Details Below
As a Download

Click Here

Circuits & Manuals
Military, Radio, TV, 
Amateur & Marine
World Wide Service
For Lists Click Here

Use R/H scroll Bar
More information below

Radio's For Sale Click Here

Military and Broadcast
Radio Ads 
Click Here

Military Radio Home Click Here If no Index to the left

Wave Meter Class C No 1 Crystal Unit and Vibrator Power Supply

General description

Purpose and facilities

The Wavemeter, Class C, No. 1 is a portable heterodyne wavemeter for use with field wireless sets for adjusting the senders and receivers to particular frequencies and for checking the frequency calibration of these sets.

The overall accuracy (±0.1 %) without a crystal unit is not sufficiently high for it to be used as a check of absolute frequency, so that, where inter-group working is required, the wavemeters checking the frequencies of each group should be checked against a crystal unit or mutually against each other.

Wavemeter Class C No1.jpg (28145 bytes)

The Manual Contains the Following :-

General description
Purpose and facilities
Weight and dimensions 
Frequency range
Power supply

Technical description
The wavemeter circuit
The power supply circuits
The L.T. supply
The H.T. supply
Alternative H.T. supply
The tuning mechanism
The inductance.
The gearing and associated mechanism
The range switch
The scale plate
The correction chart 

Working instructions
To set the wavemeter to a given, frequency
To set a sender to a given frequency
To set a receiver to a given frequency
To determine the frequency of a received signal
To determine the frequency on which a transmitter is operating
Use of a H.T. battery in place of the H.T. unit
Use of the white tablet on the front panel

Maintenance and repair
Maintenance of the wavemeter
The correction chart
Re-setting the trimming condensers
Repairs to the wavemeter
To remove the wavemeter from the case
To remove the front panel
The H.T. unit (Units H.T., vibratory, No. 1)
To remove the unit from its case
To change the vibrator

List of main components
Complete station
Crystal unit
General description
Technical description
Check points
Method of use
Miscellaneous uses 
List of main components

Fig. 1. Wavemeter, Class C, No. 1—Circuit diagram
Fig. 2. Units H.T., vibratory, No. 1—Circuit diagram
Fig. 3. Wavemeter, Class C, No. 1—Simplified circuit
Fig, 4. Crystal unit—Circuit diagram

Wavemeter, Class C, No. 1—General view.
Wavemeter, Class C, No. 1—Internal view showing HT. plug dismantled.
Waveméter, Class C, No. 1—Internal view, top panel removed
Units HT., vibratory, No. 1—External view
Units H.T., vibratory, No. 1—Internal view

Wavemeter Class C No1 Power Supply.jpg (33537 bytes)

Manual Circuit and
Operation Instructions
Details Below
As a Download

Click Here

Wave Meter Class C No 1 Crystal Unit and Vibrator Power Supply
Manuals are Available Worldwide as a Download.

Working Instructions containing 35 pages including the Circuits with Component lists and layouts

35 A4 pages worldwide

( For all Payment Options )
( Please Click the Payment Links Below

We do all we can to provide the very best that is available for you.
But in the unlikely event that any data should not be as you expected.
A refund is always available. Kind Regards Allen and Alanna.

Manuals are Available Worldwide as a Download

Thank you for your interest. Allen and Alanna G0RIT
Should you wish to purchase

For Worldwide Prices Payment Options and Delivery Details



This Website is Copyright
Copyright © 1999 [www.shopingathome.com/Military Wireless]. All rights reserved.
Please ask before using any images or text thank you.

Revised: February 09, 2021